典型应用：塑料注塑

Accuracy
Static Error Band + 0.5% FSO(RSS) 500 through 3500 psi
(Non-linearity, Hysteresis, + .25% FSO(RSS) 5000 through30000psi
Non-repeatability)
Material in Contact with Pressure Media 15-5 PH diaphragm,Armoloycoated (hard chrome)
Diamond, Boron or Titanium Nitride coatings optional
Proof Pressure 2 times full scale pressure range or
35,000 psi whichever is less
Temperature Limits
Diaphragm 750°F (400°C), 1000°F available with NaK fill
Strain Gauge Housing 176°F (80°C)
Temperature Effects from Diaphragm
From Fill
Zero 8 psi/100oF per inch of stem and capillary
From Strain Gauge Housing
Zero Less than ± 1.0% FSO/100°F
(± 2.0% FSO/100°C)
Span Less than ± 1.0% FSO/100°F
(± 2.0% FSO/100°C)
Electricals
Input Impedance
Model 130, 131 350 ohm, nominal
Input Current
Model 230, 231 8 mA, nominal
Load Impedance
Model 130, 131 50,000 ohms minimum for less than 0.1%
FSO attenuation
Model 330, 331 1350 ohms maximum, at 36 Vdc and 750
ohms at 24 Vdc
Output Current
Model 230, 231 2.0 mA maximum for less than 0.1% FSO
attenuation
Zero Balance
Model 130, 131 0.0 mV/V ± 5% FSO @ 70°F
Model 230, 231 0.0 Vdc ± 2% FSO @ 70°F
Model 330, 331 4.0 mA ± 2% FSO @ 70°F
Range Calibration Signal 80% ± 0.5% FSO standard
Connections
Pressure 1/2” - 20 UNF-2A thread for standard
(M18 x 1.5 metric thread optional)
Electrical PTIH-10-6P, standard
PT06A-10-6S (SR), standard mate
(not included) See options.
Enclosed Materials 316 stainless steel
Mounting Torque 500 inch pounds, maximum
Identification Etched stainless steel nameplate welded